Electro-Optics for Industry and Science
Since 1979
 |
 |
 |
 |
Electro-Optics for Industry and Science
Since 1979
|
|
|
|
Model 570-16 Fiberoptic Transceiver
The Model 570-16 combines the capabilities of a transceiver and a controller in a single unit. You can perform SCADA master, slave, and point-to-point communications within the same device making it a highly flexible solution. More ...
Model 570 Fiberoptic Transceiver
The Model 570 is a self-healing, single mode fiberoptic transceiver. It features 127 high speed (56Kbps) independent virtual network communication channels and from four to sixteen serial ports. More ...
Model 570/542 Dual Function Fiberoptic Transceiver
The model 570/542 dual function transceiver combines all the features and performance of our newest model 570 transceiver with full support for legacy, 542-based networks. More ...
Model 561(560/562) Fiberoptic Transceiver
The Model 561 transceiver is used on a pair of multidropped
fiber for all remote devices including RTUs, Programmable Logic Controllers (PLCs), and IEDs. You can arrange the transceivers in either a loop or bus (radial) topology, which ensures flexibility for expanding a system if needed in the future. More ...
Model 561-16 Fiberoptic Transceiver
The Model 561-16 controller/transceiver provides 16 virtual channels, supports both loop and radial network topologies, and incorporates fault tolerant, redundant self-healing loop technology. More ...
Model 550/552 Fiberoptic Transceiver
The Model 550 and 552 transceivers are designed for SCADA and data acquisition applications. Both transceivers are microprocessor controlled, include an LED alphanumeric display, non-volatile memory, and a built-in optical meter. More ...
Model 542B Fiberoptic Transceiver
The Model 542B Fiberoptic Transceiver was the world's first repeating, multi-drop, fiberoptic RS-232 modem designed for multi-drop SCADA system applications. More ...
Model 532A Fiberoptic Modem/Multiplexer
The Model 532A Fiberoptic Modem/Multiplexer provides up to four isolated RS-232 channels for communication and multiplexes all the signals in one direction into an encoded optical carrier to transmit the data. More ...
Model 531 Digital I/O
The 531-8 Digital I/O replaces copper wire and galvanically isolates, protects, and monitors contacts remotely (such as close-coil, local, or remote trip) and supports telemeter revenue meter pulses over large distances. More ...
Model 508B Fiberoptic TransNet Extender
The Model 508B Fiberoptic TransNet Extender provides fiberoptic isolation when using the Measurement Technology Limited TransPort System. More ...